Install Tips
|
Tip Number: 109
5-Wire Reverse Polarity Door Lock Systems
Applies to: All Vehicles Before connecting any wires, you must first determint the type of master door lock switch the vehicle has. There are 3 basic types of door lock systems: 3-wire negative, 3-wire positive, and 5-wire reverse polirity systems. Each system can be identified by testing the wires coming from the door lock switch and determining the polcarrity of the wires with a multimeter or voltmeter.
There are usually 5 wires coming from the switch in a 5-wire reverse polarity door lock system. The switch is grounded at rest and receives +12 volt power when in use. Refer to the item instructions for complete wiring.
| The information on this website is provided on an "as-is" basis with
no representation or warranty of accuracy whatsoever. It is the
sole responsibility of the installer to verify every circuit before
connecting to it. IC Dynamics, Inc. and our suppliers assume
absolutely no liability or responsibility whatsoever pertaining to the
accuracy or completeness of the information supplied on this website.
|
Questions
or comments about this Install Tip?
Please complete our Feedback Form
|
|